Version 1 (modified by branden, 10 years ago) (diff)


{{{Earthworm Release Notes V7.3

(December 23, 2008) New Modules Modifications/ Bug Fixes to Existing Modules Changes To Configuration Files And Descriptor Files Known Bugs Known Deficiencies

NEW MODULES: SaraAdSend? - new module to import data from a SARA digitizer over a serial port. Written by Larry Cochrane (webtronics). Imported into EW by Paul Friberg 2008-02-11

RockToEW - Provides a data relay from a Kinemetrics-Rockhound-compatible instrument into Earthworm via an export of Tracebuf2 messages Written by Eric Thomas of ISTI 2008-11-06

MODIFICATIONS/BUG FIXES TO EXISTING MODULES: raypicker - upgrade from Carol Bryan, latest version from NEIC Paul Friberg 2008-12-02

srparxchewsend - with direction from Symmetric, downloaded latest code from installed and and tested compiles on Windows and Linux. Stefan Lisowski 2008-12-02

localmag - Claudio Satriano noticed a bug in the SAC input file reading that was causing seg faults. This is now fixed in the latest version. Paul Friberg 2008-12-01

tankplayer - added a GetFromDir? option to the module so that one could load tanks dynamically. This is a way for groups who have strange format data to convert them into tanks and run them in near real time. This code borrows heavily from the file2ew implementation. It has been tested in both old style (listing WaveFile? entries) and with GetFromDir? mode. The Documentation will be updated to reflect the new mode in v7.3 of ew. Paul Friberg 2008-09-09

sniffring - fixed a weird case where a module id was foreign to a local installation (imported) and thus not lookupable in the earthworm.d module list. Verbose mode would core dump in this case. Paul Friberg 2008-07-31

naqs2ew - updated the list of Nanometrics Instrument types to include all current Nmx hardware. Lynn Dietz 2008-07-21

scream2ew - Modified to issue a single Earthworm heartbeat at the end of ewc_init(), which is called just before a connection to the SCREAM server is attempted. Previously, the first Earthworm heartbeat was issued only after the SCREAM connection was complete. If the SCREAM connection failed, scream2ew exited with no heartbeat, making it impossible for statmgr to issue an auto-restart request because it didn't know scream2ew's PID. Now if the SCREAM connection fails, auto-restarts via statmgr/startstop will be possible. Lynn Dietz 2008-06-26

startstop - for UNIX, if you had a bug in your startstop_sol.d or startstop_unix.d configuration files, then the program would stop and issue a bogus message about logit_init() not set. However, if you put the .d file on the command line, it would intelligently process the .d file and warn you where the problem was. I fixed this by modifying the startstop_unix_generic.c library call. Paul Friberg 2008-05-19

k2ew_tcp - Lynn Dietz discovered and fixed a compilation issue for special cases of k2s that have modems and serial streaming (used at CGS).

trig2disk - fixed starttime of additional SCNL includes. It was incorrectly providing the max start time of the TRIGGER message. It now correctly uses the minimum start time of the SCNLs in the TRIGGER message for any additional SCNLs. Bug spotted by Franco Mele of INGV, fixed by Paul Friberg 2008-04-28

ms2tank - improved code so that it can handle mulitplexed mseed packets. Paul Friberg 2008-04-22

binder_ew - added optional command "BufferRingKB" to control the size of binder's private buffer ring. The default is 256 KB (262144 bytes) is slightly larger than the previous hard-coded size (250000 bytes). Lynn Dietz 2008-04-22

src/libsrc/util/libmseed - upgraded to 2.1.4 version of libmseed library from Chad Trabant of IRIS DMC. Paul Friberg 2008-04-04

pick_ew - added a PickIndexDir? optional setting to allow the pick_ew_MMM.ndx files to be written somewhere other than the params directory. The params directory is getting cluttered up enough and its nice to have the option to write these indexes elsewhere. Paul Friberg 2008-03-28

slink2ew - 2.0ewd - upgrade from Chad Trabant that inclues Matteo's fix and some new features for wildcarding (Paul Friberg 2008-03-14) slink2ew - 1.4.1 - fixed a crashing problem that involved bad mseed packets not being detected. They are now skipped. Matteo Quintilani 2008-03-05

waveman2disk - upgraded the logit_init() call to be able to handle the largest possible trigger message size MAX_TRIG_BYTES. Before it was set to just 1024 and this would throw out a bogus error message that the logit buffer was too small. Reported by Jean-Michel Douchain. Paul Friberg 2008-02-25

carlstatrig - would report that it was not using STAtime in an error message when it actually was! This was fixed by David Wilson of HVO and is a minor change to the readcnfg.c module. Paul Friberg 2008-02-21

fir - fixed a byte-order issue that appeared when the WaveMsg2MakeLocal() was called before some header values were checked. This resulted in a failure that indicated zero length traces. Mitch Withers 2008-02-13

reftek2ew - add makefile.ux Richard Godbee 2008-02-11

sniffwave - added in a new simple command line option to replicate:

sniffwave RING wild wild wild wild n

by simply typing:

sniffwave RING

This will hopefully save folks just wishing to look at the tracebufs in a ring sometime. Paul Friberg 2008-01-19

putpick - didn't have a makefile.ux, now it does Paul Friberg 2008-01-16

localmag - fixed a bug with the LM option of outputFormat. I am shocked this was never discovered before...basically an if should have been an "else if". Paul Friberg 2008-01-08



liss2ew: liss2ew has been observed intermittantly producing malformed TRACE_BUF messages. Currently the conditions for causing this problem are unknown. Due to this, liss2ew should be treated as suspect. Use at your own risk. JMP 6-18-2003

wave_serverV: appears not to reply to requests for a single sample of data. I noticed when testing wave_viewer, that if the start time and end time of a request were equal (in which case there should be one sample of data) then wave_serverV did not reply to the request (ASCII request) at all. No Data, No Flags, No Reply, No Nothing. It needs to issue a reply to every request. DavidK 09/25/01

Automatic restarts of adsend (using the "restartMe" line in the descriptor file) can cause an NT system to hang. Therefore, you should never use the autorestart feature with adsend, but you should bring down the entire Earthworm system if adsend needs to be restarted. LDD 5/31/2000 Comments added to adsend.desc, but leave this warning here!

libsrc/utils/site.c: The strings used for station, channel and network are required to be fixed length with trailing spaces added to short names. If the strings given to site_index do not have these trailing blanks, SCN names will not match. This is not documented anywhere. PNL 10/15/00

KNOWN DEFICIENCIES: ringtocoax: In Windows NT, the time resolution of sleep_ew() is about 16 msec (one clock tick). On Solaris, the resolution is about 10 msec. This is a problem for ringtocoax, since packet delays need to be set to a few milliseconds.

threads functions: The KillThread? function on WindowsNT and Solaris terminate the thread without ensuring that no mutexes are held. If a thread holds a mutex when it dies, no other thread can get that mutex. PNL 1/12/2000

carlsubtrig: The system time must be set to GMT and ew_nt.cmd must have TZ=GMT for carlsubtrig to work. Comments in ew_nt.cmd done 5/25/00. Barbara localmag: needs GMT set on the system

ew2seisvole: on NT, exits with horrible crash when system is stopped.

NUMBER OF RINGS LIMITED ON SOLARIS: Under Solaris 2.6 (and probably other versions as well), the maximum number of shared memory segments is six. This means that on an out-of-the-box machine you can only configure six rings. If you try to configure more than that, you will see a cryptic message from tport_create about too many open files. The fix to this problem is to add the following lines to the /etc/system file, and then reboot the system.

set shmsys:shminfo_shmmax = 4294967295 set shmsys:shminfo_shmmin = 1 set shmsys:shminfo_shmmni = 100 set shmsys:shminfo_shmseg = 20 set semsys:seminfo_semmns = 200 set semsys:seminfo_semmni = 70

This allows for 20 rings.

Lucky Vidmar (7/6/2000)

TRACEBUF messages. The definition of `endtime' of the TRACEBUF message is not documented. Some programmers are taking it as the "expected start time of the next TRACEBUF packet (if the sample interval is uniform.)" The more accepted practice is that `endtime' is the time of the last sample of the current TRACEBUF packet; that is, one sample interval less than the expected start time of the next TRACEBUF messsage. Using this last definition, if a TRACEBUF packet has exactly one sample, then its starttime and endtime are the identical. Clearly this distinction needs to be documented. The file waveform_format (in the /home/earthworm/DOC directory) gives no specifics about start or end times. PNL 1/24/01 }}}