Changes between Initial Version and Version 1 of saraadsend


Ignore:
Timestamp:
03/19/12 17:45:12 (10 years ago)
Author:
branden
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • saraadsend

    v1 v1  
     1[[PageOutline]] 
     2 
     3= [wiki:Earthworm Earthworm] Module: saraadsend = 
     4'''Contributed by: ''' 
     5 
     6== Function == 
     7A SARA digitizer earthworm data feeding module (serial input, windows only). (new in EW v7.3) 
     8 
     9== Details == 
     10SaraAdSend is another digitizing program similar to ADsend for Earthworm. This module runs under Windows 2000 or XP and produces demultiplexed data to one of the transport data rings. This program was designed to work with the SARA RS-232 serial output Analog to Digital boards. 
     11 
     12This module was built using Microsoft Visual C++ 8.0. The program (SaraAdSend.exe) has been tested using Earthworm version 7.2. 
     13 
     14=== Example Configuration File === 
     15{{{ 
     16# 
     17#                    CONFIGURATION FILE FOR SARAADSEND 
     18#                    ----------------------------- 
     19ModuleId         MOD_SARAADSEND_A       # Module id of this instance of SaraAdSend 
     20OutRing          WAVE_RING              # Transport ring to write waveforms to 
     21CommPort         1                      # Comm port number 
     22PortSpeed        38400                  # Comm port baud rate, can be set to 9600, 19200, 38400 or 57600 
     23# 
     24#                        CHANNEL CONFIGURATION 
     25Nchan            3                      # Specify number of channels to record, can 1 to 8 
     26ChanRate         100                    # Sampling rate in samples per second, can be 5, 10, 20, 50, 100 or 200 
     27# 
     28#                         TIMING INFORMATION 
     29HeartbeatInt     15                     # Heartbeat interval in seconds 
     30TimeoutNoSend    30                     # Time in seconds before program will reset if no data from ADC board 
     31TimeoutNoSynch   60                     # Not used 
     32UpdateSysClock   0                      # 1 = PC time updated with AD board time 
     33HighToLowPPS     0                      # 1 = PPS signal direction is High to Low 
     34TimeOffset       0                      # Time Reference offset in milliseconds 
     35# 
     36# Time Reference Types: 
     37# 0 = Use PC Time, 1 = Garmin GPS 16 or 18, 2 = Motorola ONCORE NMEA,  
     38# 3 = Motorola ONCORE Binary, 4 = WWV (must have WWV option on the ADC board ) 
     39# 
     40TimeRefType      0                      # One of the types above 
     41TimeFilePath     c:\earthworm\          # where to place the time.dat file 
     42# 
     43#                          
     44#                          OTHER INFORMATION 
     45LogMessages      1                      # 1 = Log messages from DLL & ADC to log file 
     46NoPPSLedStatus   0                      # 1 = Disable 1PPS LED blinking 
     47AdcDataSize      2                      # ADC trace buffer data size in bytes. Can be 2 or 4 bytes 
     48# 
     49# 
     50#               SCNL (Station/Component/Network/Location) FOR EACH ADC CHANNEL 
     51# Chan lines must follow the Channel Configuration lines in this file. There should 
     52# be Nchan (see above) SCNL lines. 
     53#  
     54#     Chan  Station/Comp/Network/Location 
     55#   -------   -------------- 
     56Chan    0       STA BHZ PN NC 
     57Chan    1       STA BHN PN NC 
     58Chan    2       STA BHE PN NC 
     59#----------------------------- 
     60# 
     61}}} 
     62 
     63== Helpful Hints ==