Changes between Version 5 and Version 6 of nmxptool


Ignore:
Timestamp:
04/08/12 16:52:55 (9 years ago)
Author:
branden
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • nmxptool

    v5 v6  
    112112Function: nmxptool parameters 
    113113 
    114 Specifies one stream of data to be requested from the !NmxpHost. The streamkey is not in SCNL format. It is composed of a network, station and channel code separated by period. network is optional and it is used only for output. Station code can be "*" that stands for all stations. Within channel code can appear character "?" that stands for any characters. Location value is always set to "--". DO NOT USE WITH ChannelFile! 
     114Specifies one stream of data to be requested from the !NmxpHost. The streamkey is not in SCNL format. It is composed of a network, station and channel code separated by period. network is optional and it is used only for output. Station code can be "*" that stands for all stations. Within channel code can appear character "?" that stands for any characters. Location value is always set to "--". DO NOT USE WITH !ChannelFile! 
    115115{{{ 
    116116Default:  none 
     
    205205Function: nmxptool parameters 
    206206 
    207 Max amount of data of the past to retrieve from the !DataServer when program restarts. 0 to disable connection to !DataServer. If this parameter is zero and !ChannelFile is used, only data buffered by !NaqsServer will be retrieved. Rather than using !MaxDataToRetrieve, it is preferable, inside the section !Datastream of the file Naqs.ini, setting !DataBufferLength to a high value (read Advanced Description). !MaxDataToRetrieve allows to retrieve much more data of the past when the program restarts but it considerably slows down the execution. It is extremely harmful when you have many channels, in this case you might consider to subdivide the channels into different nmxptool instances. Range is [0..86400]. 
     207Max amount of data of the past to retrieve from the !DataServer when program restarts. 0 to disable connection to !DataServer. If this parameter is zero and !ChannelFile is used, only data buffered by !NaqsServer will be retrieved. Rather than using !MaxDataToRetrieve, it is preferable, inside the section Datastream of the file Naqs.ini, setting !DataBufferLength to a high value (read Advanced Description). !MaxDataToRetrieve allows to retrieve much more data of the past when the program restarts but it considerably slows down the execution. It is extremely harmful when you have many channels, in this case you might consider to subdivide the channels into different nmxptool instances. Range is [0..86400]. 
    208208{{{ 
    209209Default:  0 
     
    215215Function: nmxptool parameters 
    216216 
    217 Specifies the max tolerable latency for raw stream connection. For enabling !NaqsServer to send out retransmission requests for missed packets set !RetxRequest (read Advanced Description). If !RetxRequest is not enabled then !MaxTolerableLatency is ineffective. Range is [60..600]. NOT use with parameter ShortTermCompletion. 
     217Specifies the max tolerable latency for raw stream connection. For enabling !NaqsServer to send out retransmission requests for missed packets set !RetxRequest (read Advanced Description). If !RetxRequest is not enabled then !MaxTolerableLatency is ineffective. Range is [60..600]. NOT use with parameter !ShortTermCompletion. 
    218218{{{ 
    219219Default:  600 
     
    261261}}} 
    262262 
    263 '''!NmxpPortPDS [port]'''[[BR]] 
     263'''NmxpPortPDS [port]'''[[BR]] 
    264264Processed by: !ReadConfig[[BR]] 
    265265Function: nmxptool parameters 
     
    489489 
    490490== Helpful Hints == 
    491  
    492  
    493  
    494 The following list is organized by: 
    495  
    496 command [argument here]