Changes between Version 2 and Version 3 of gcf2ew


Ignore:
Timestamp:
05/02/12 12:38:40 (8 years ago)
Author:
branden
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • gcf2ew

    v2 v3  
    1616This version uses a Lantronix MSS100 for the reliable transmission of data over a network. It also provides the capability for direct serial connection to a DM24 digitizer from a Solaris workstation. The direct serial connection makes full use of the BRP protocol that DM24's use to correct for serial line errors. In addtion, the gcfserv program can be used to serve data to multiple receivers using a PULL protocol that the gcf2ew module is configured for. V1.0.0 and later has SCNL capability for EW v7.0 and greater. It needs to be compiled with EW v7.0 and later, but is backward compatible to earlier versions of Earthworm. 
    1717When running with an MSS100 or gcfserv, the module provides a reliable reconnection if the IP connection should drop. The network input also uses the Guralp BRP serial protocol to rewind the DM to request missing packets. 
     18 
     19== Configuration File Commands == 
    1820 
    1921On startup, gcf2ew reads the configuration file named on the command line. As always, the configuraton file contains comments: