Changes between Version 1 and Version 2 of gcf2ew


Ignore:
Timestamp:
03/25/12 16:40:30 (9 years ago)
Author:
branden
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • gcf2ew

    v1 v2  
    136136Processed by: main[[BR]] 
    137137Function: Earthworm setup[[BR]] 
    138                  
     138 
    139139Connect to the mss100 at the ip address IP address. This option accepts fully qualified domain names as well as IP numbers. Note that the !PortNumber is also required. 
    140140 
     
    145145Connect to the gcfserv module at the ip address IP address. This option accepts fully qualified domain names as well as IP numbers. Note that the !PortNumber is also required. Default port numbers for gcfserv are 45670. 
    146146 
    147 '''!SerialPort [SerialDevice]'''[[BR]] 
     147'''!SerialPort [!SerialDevice]'''[[BR]] 
    148148Processed by: main[[BR]] 
    149149Function: Earthworm setup 
     
    154154Processed by: main[[BR]] 
    155155Function:Earthworm setup 
    156                  
     156 
    157157Connect to the DM24 at the !BaudRate rate specified. To use this input mode, the !SerialPort directive must also be used. The baud rates are the standard allowable rates on a solaris host: 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200. 
    158158 
     
    160160Processed by: none[[BR]] 
    161161Function: Main gcf2ew Thread 
    162                  
    163 Sets the on-off switch for writing GSL GCF STATUS channels to the LogFile. If switch is 0, no LOG channels will be written to the log. If switch is 1, gcf2ew will write all LOG channels to the LogFile. Turning this on will automatically turn on writing of a !LogFile. 
     162 
     163Sets the on-off switch for writing GSL GCF STATUS channels to the !LogFile. If switch is 0, no LOG channels will be written to the log. If switch is 1, gcf2ew will write all LOG channels to the !LogFile. Turning this on will automatically turn on writing of a !LogFile. 
    164164{{{ 
    165165Default:  0 - do not use logit() for LOG channels 
     
    169169Processed by: !GetConfig[[BR]] 
    170170Function: Earthworm Setup 
    171                  
     171 
    172172Sets the on-off switch for writing a log file to disk. If switch is 0, no log file will be written. If switch is 1, gcf2ew will write a daily log file(s) called gcf2ewxx.log_yymmdd where xx is gcf2ew's module id (set with "!MyModuleId" command) and yymmdd is the current UTC date (ex: 960123) on the system clock. The file(s) will be written in the EW_LOG directory (environment variable). 
    173173{{{ 
     
    178178Processed by: !GetConfig[[BR]] 
    179179Function: Earthworm setup 
    180                  
     180 
    181181Sets the module id for labeling all outgoing messages. mod_id is a character string (valid strings are listed in earthworm.d) that relates (in earthworm.d) to a unique single-byte number. 
    182182{{{ 
     
    228228Processed by: !HeartBeat[[BR]] 
    229229Function: Earthworm setup 
    230                  
     230 
    231231If no waveform packets come from the DM after timeout seconds, the gcf2ew module will notify statmgr and die. If timeout is set to 0, then the gcf2ew module will never check for this timeout. If set to 0, gcf2ew will only die if the Earthworm system calls for its termination. This timeout begins once the first Waveform packet is received from the DM served by this MSS100. 
    232232{{{