Changes between Version 4 and Version 5 of eqprelim


Ignore:
Timestamp:
05/29/12 10:42:34 (8 years ago)
Author:
branden
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • eqprelim

    v4 v5  
    180180Enters a station location into the station site table, where name is the station code used by the picker, and latitude and longitude are expressed in decimal degrees (positive to the north and east). Use either multiple "site" commands or one "site_file" command to load the station list into eqprelim. 
    181181 site_file filename                     site_com                model     
    182 Enters site codes and station locations into the site table by reading a HYPOINVERSE format station file called filename. In this file, stations are described by a 5-letter site name, a 2-letter network code and a 3-letter component code. The picker must also be using this station-naming convention. The format of the file is described under "HYPOINVERSE STATION FILE FOR FULL 12-LETTER (S-N-C-L) CHANNEL NAMES". Use either one "site_file" command or multiple "site" commands to load the station list into eqprelim. 
     182Enters site codes and station locations into the site table by reading a HYPOINVERSE format station file called filename. In this file, stations are described by a 5-letter site name, a 2-letter network code and a 3-letter component code. The picker must also be using this station-naming convention. The format of the file is described under [wiki:hypo_file_format HYPOINVERSE STATION FILE FOR FULL 12-LETTER (S-N-C-L) CHANNEL NAMES]. Use either one "site_file" command or multiple "site" commands to load the station list into eqprelim. 
    183183 
    184184=== THE "MEGA-MODULE" WHICH BEGINS WITH EQPRELIM === 
    185185 
    186 The eqprelim "mega-module" is a chain of processes that produces preliminary earthquake locations for the Earthworm system. Only eqprelim, the first link in the mega-module, is listed in startstop's configuration file to be started by startstop. Eqprelim then starts the next process, specified in its "PipeTo" command, and communicates with it via a pipe. Each newly created process starts the next link in the same way. From startstop's point of view, the whole mega-module inherits the name of the first link (eqprelim) and that's the only name it displays. From statmgr's point of view, all processes within the mega-module share one module id, one heartbeat, and one descriptor file. However, each process has its own configuration file and its own log file. 
     186The eqprelim "mega-module" is a chain of processes that produces preliminary earthquake locations for the Earthworm system. Only eqprelim, the first link in the mega-module, is listed in startstop's configuration file to be started by startstop. Eqprelim then starts the next process, specified in its "!PipeTo" command, and communicates with it via a pipe. Each newly created process starts the next link in the same way. From startstop's point of view, the whole mega-module inherits the name of the first link (eqprelim) and that's the only name it displays. From statmgr's point of view, all processes within the mega-module share one module id, one heartbeat, and one descriptor file. However, each process has its own configuration file and its own log file. 
    187187 
    188188As of 10 October, 1996, the eqprelim mega-module consists of the following "links":