Changes between Version 6 and Version 7 of eqassemble


Ignore:
Timestamp:
05/26/12 12:19:24 (8 years ago)
Author:
branden
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • eqassemble

    v6 v7  
    196196Function: Event Notification 
    197197 
    198 Identify from which installations (by inst_id) eqassemble should wait for coda messages for the FinalRule, other than the local inst_id. This optional command is only useful if the FinalRule is turned on and configured to WaitForCodas. If you are importing TYPE_PICK_SCNL and TYPE_CODA_SCNL messages from other Earthworm installations, then you may want eqassemble to wait for those codas. But if another Earthworm installation was sending only TYPE_PICK_SCNL messages, then you would not want eqassemble to wait for those TYPE_CODA_SCNL messages. You can list as many CodaFromInst as needed. But you do not need to list your own inst_id. 
     198Identify from which installations (by inst_id) eqassemble should wait for coda messages for the !FinalRule, other than the local inst_id. This optional command is only useful if the !FinalRule is turned on and configured to !WaitForCodas. If you are importing TYPE_PICK_SCNL and TYPE_CODA_SCNL messages from other Earthworm installations, then you may want eqassemble to wait for those codas. But if another Earthworm installation was sending only TYPE_PICK_SCNL messages, then you would not want eqassemble to wait for those TYPE_CODA_SCNL messages. You can list as many !CodaFromInst as needed. But you do not need to list your own inst_id. 
    199199{{{ 
    200200Default:  none 
     
    216216Function: Event Notification 
    217217 
    218 The final TYPE_EVENT2K message will be released after binder has not changed the solution (no TYPE_QUAKE2K messages) in Msec seconds, provided there are at least Np P phases associated with the event. If the optional string WaitForCodas is included in the FinalRule command, eqassemble will wait up to 150 seconds after a phase arrival until the corresponding coda message is received. Normally the extra wait for codas applies only to TYPE_CODA_SCNL messages from the local inst_id. Use the CodaFromInst command to tell eqassemble to wait for codas from other Earthworm installations. 
     218The final TYPE_EVENT2K message will be released after binder has not changed the solution (no TYPE_QUAKE2K messages) in Msec seconds, provided there are at least Np P phases associated with the event. If the optional string !WaitForCodas is included in the !FinalRule command, eqassemble will wait up to 150 seconds after a phase arrival until the corresponding coda message is received. Normally the extra wait for codas applies only to TYPE_CODA_SCNL messages from the local inst_id. Use the CodaFromInst command to tell eqassemble to wait for codas from other Earthworm installations. 
    219219 
    220220The final TYPE_EVENT2K message is assigned version number 2. This version number will show up in the hypoinverse archive message produced by hyp2000_mgr, usually the last program in the "sausage". 
     
    379379}}} 
    380380 
    381 '''!ReportS [switch]'''[[BR]] 
     381'''ReportS [switch]'''[[BR]] 
    382382Processed by: eqas_config[[BR]] 
    383383Function: notification 
     
    414414'''!WaifTolerance [N]'''[[BR]] 
    415415Processed by: eqas_config[[BR]] 
    416 Fucntion: OutPut Control 
     416Fucntion: !OutPut Control 
    417417 
    418418When eqassemble is preparing to release a final (version 2) TYPE_EVENT2K message, it logs information about phases associated with the event, and about phases not associated with this event but which have "small" travel time residuals relative to this event. This command gives the largest absolute value residual as N seconds. See Description of eqassemble's log file for more details about eqassemble's log files.